Coursera

Techniques of Design-Oriented Analysis (Coursera)

Offered by University of Colorado Boulder,
Techniques of Design-Oriented Analysis (Coursera)

This is Course #2 in the Modeling and Control of Power Electronics course sequence. The course is focused on techniques of design-oriented analysis that allow you to quickly gain insights into models of switching power converters and to translate these insights into practical converter designs. The design-oriented techniques covered are the Extra Element Theorem and the N-Extra Element Theorem (N-EET). Through practical examples, it is shown how the EET can be used to simplify circuit analysis, to examine the effects of initially unmodeled components, and to design damping of converters such as SEPIC and Cuk to achieve high-performance closed-loop controls.

Class Deals by MOOC List - Click here and see Coursera's Active Discounts, Deals, and Promo Codes.

The N-EET will allow you to perform circuit analysis and to derive circuit responses with minimum algebra. Modeling and design examples are supported by design-oriented MATLAB script and Spice simulations. After completion of this course, the student will gain analytical skills applicable to the design of high-performance closed-loop controlled switching power converters.
We strongly recommend students complete the CU Boulder Power Electronics specialization as well as Course #1 Averaged-Switch Modeling and Simulation before enrolling in this course (the course numbers provided below are for students in the CU Boulder's MS-EE program):
●Introduction to Power Electronics (ECEA 5700)
● Converter Circuits (ECEA 5701)
● Converter Control (ECEA 5702)
● Averaged-Switch Modeling and Simulation (ECEA 5705)
After completing this course, you will be able to:
● Understand statement and derivation of the Extra Element Theorem
● Apply the Extra Element Theorem to converter analysis and design problems
● Understand the statement of the N-Extra Element Theorem
● Apply the N-Extra Element Theorem to converter analysis and design problems
● Apply techniques of design-oriented analysis to analysis, design, and simulations of switching converters
What You Will Learn

  • Understand statement and derivation of the Extra Element Theorem
  • Apply the Extra Element Theorem to converter analysis and design problems
  • Understand the statement of the N-Extra Element Theorem
  • Apply the N-Extra Element Theorem to converter analysis and design problems

Course 2 of 5 in the Modeling and Control of Power Electronics Specialization

Syllabus

WEEK 1
Extra Element Theorem
Introduction to Extra Element Theorem: statement, derivation, and application examples

WEEK 2
Design example: SEPIC frequency responses
Application of the Extra Element Theorem to analysis and design of complex converter transfer functions

WEEK 3
N Extra Element Theorem (NEET)
Introduction to N Extra Element Theorem: statement, and application examples

Go to Class
MOOC List is learner-supported. When you buy through links on our site, we may earn an affiliate commission.

Related Courses

Modeling Time Series and Sequential Data (Coursera) Coursera
SAS

Modeling Time Series and Sequential Data (Coursera)

Statistics & Data Analysis Data Science

In this course you learn to build, refine, extrapolate, and, in some cases, interpret models designed for a single, sequential series. There are three modeling approaches presented. The traditional, Box-Jenkins approach for modeling time series is covered in the first part of the course. This presentation moves students from models for stationary data, or ARMA, to models for trend and seasonality, ARIMA, and concludes with information about specifying transfer function components in an ARIMAX, or time series regression, model. A Bayesian approach to modeling time series is considered next.

Nov 9th 2026
5-12 Weeks
Modeling Data Analysis Bayesian Methods
Details
Healthy Urban systems Part 2 : Theories, models and tools (Coursera) Coursera
University of Lausanne

Healthy Urban systems Part 2 : Theories, models and tools (Coursera)

Health & Society

This MOOC is the second part (out of three parts) of the whole MOOC on Healthy Urban Systems. These PART II is very recommended (but not obliged) to take after the PART I and before the PART III. Once you understood the main concepts and visions of Urban Health, and the best practices of observation in PART I, you are ready to think about theories and to practice models for this PART II.

Nov 16th 2026
4 Weeks
Modeling Urban System Coursera Plus
Details
The Analyze Phase for the 6 σ Black Belt (Coursera) Coursera
University System of Georgia

The Analyze Phase for the 6 σ Black Belt (Coursera)

Business

This course is designed for professionals interested in learning the principles of Lean Sigma, the DMAIC process and DFSS. This course is number 5 of 8 in this specialization dealing with topics in the Analyze Phase of Six Sigma. Professionals with some completed coursework in statistics and a desire to drive continuous improvement within their organizations would find this course and the others in this specialization appealing. Method of assessment consists of several formative and summative quizzes and a multi-part peer reviewed project completion regiment.

Nov 2nd 2026
5-12 Weeks
Hypothesis Modeling Six Sigma
Details
Current-Mode Control (Coursera) Coursera
University of Colorado Boulder

Current-Mode Control (Coursera)

Engineering Sci: Physics

This is Course #4 in the Modeling and Control of Power Electronics course sequence. The course is focused on current-mode control techniques, which are very frequently applied in practical realizations of switched-mode. Practical advantages of peak current mode control are discussed, including built-in overcurrent protection, simpler and more robust dynamic responses, as well as abilities to ensure current sharing in parallel connected converter modules.

Nov 9th 2026
4 Weeks
Modeling Simulation Power Electronics
Details
Quantitative Formal Modeling and Worst-Case Performance Analysis (Coursera) Coursera
EIT Digital

Quantitative Formal Modeling and Worst-Case Performance Analysis (Coursera)

CS: Software Engineering

Welcome to Quantitative Formal Modeling and Worst-Case Performance Analysis. In this course, you will learn about modeling and solving performance problems in a fashion popular in theoretical computer science, and generally train your abstract thinking skills. After finishing this course, you have learned to think about the behavior of systems in terms of token production and consumption, and you are able to formalize this thinking mathematically in terms of prefix orders and counting functions. You have learned about Petri-nets, about timing, and about scheduling of token consumption/production systems, and for the special class of Petri-nets known as single-rate dataflow graphs, you will know how to perform a worst-case analysis of basic performance metrics, like throughput, latency and buffering.

Nov 16th 2026
4 Weeks
Semantics Engineering Modeling
Details
Averaged-Switch Modeling and Simulation (Coursera) Coursera
University of Colorado Boulder

Averaged-Switch Modeling and Simulation (Coursera)

Engineering

This is Course #1 in the Modeling and Control of Power Electronics course sequence. The course is focused on practical design-oriented modeling and control of pulse-width modulated switched mode power converters using analytical and simulation tools in time and frequency domains. A design-oriented analysis technique known as the Middlebrook's feedback theorem is introduced and applied to analysis and design of voltage regulators and other feedback circuits.

Nov 2nd 2026
3 Weeks
Modeling Simulation Power Electronics
Details
Modeling and Control of Single-Phase Rectifiers and Inverters (Coursera) Coursera
University of Colorado Boulder

Modeling and Control of Single-Phase Rectifiers and Inverters (Coursera)

Engineering Sci: Physics

This is Course #5 in the Modeling and Control of Power Electronics Specialization. The course is focused on modeling and control of grid-tied power electronics. Upon completion of the course, you will be able to understand, analyze, model, and design low-harmonic rectifiers and inverters interfacing dc loads or dc power sources, such as photovoltaic arrays, to the single-phase ac power grid.

Nov 9th 2026
3 Weeks
Modeling Simulation Power Electronics
Details
Introdução ao Controle Moderno (Coursera) Coursera
Instituto Tecnológico de Aeronáutica

Introdução ao Controle Moderno (Coursera)

Engineering Sci: Physics

Este curso lhe dará a base necessária para entender técnicas mais avançadas de controle moderno. Você aprenderá como representar a dinâmica de um sistema no espaço de estados, como analisar um sistema no espaço de estados, como projetar uma realimentação de estado e como projetar um observador de estado.

Nov 16th 2026
5-12 Weeks
MATLAB Modeling Electrical Engineering
Details
Converter Circuits (Coursera) Coursera
University of Colorado Boulder

Converter Circuits (Coursera)

Engineering Eng: Electronics

This course introduces more advanced concepts of switched-mode converter circuits. Realization of the power semiconductors in inverters or in converters having bidirectional power flow is explained. Power diodes, power MOSFETs, and IGBTs are explained, along with the origins of their switching times. Equivalent circuit models are refined to include the effects of switching loss. The discontinuous conduction mode is described and analyzed. A number of well-known converter circuit topologies are explored, including those with transformer isolation.

Nov 9th 2026
4 Weeks
Circuits Power Electronics Converter Circuits
Details
Introduction to 3D Modeling (Coursera) Coursera
University of Michigan

Introduction to 3D Modeling (Coursera)

CS: Design & Product

On this four-week practical course from the University of Michigan, you’ll not only learn how to use the Rhino software to create your 3D models, but you’ll also gain basic design skills to help bring your imagination to life. This course will guide you through 3D modeling within Rhino, so you’ll cover the fundamentals of the software as well as 3D modeling in general. You’ll first look at how to navigate the user interface and the different tools that you’ll be using to create models throughout this course. You’ll familiarize yourself with the 3D space and 3D objects before jumping straight in to create your own objects and building blocks.

Nov 2nd 2026
4 Weeks
3D 2D Modeling
Details