EdX

Structure of Materials (edX)

Offered by MIT, MITx,
Structure of Materials (edX)

Discover the structure of the materials that make up our modern world and learn how this underlying structure influences the properties and performance of these materials. Structure determines so much about a material: its properties, its potential applications, and its performance within those applications. This course from MIT’s Department of Materials Science and Engineering explores the structure of a wide variety of materials with current-day engineering applications.

Class Deals by MOOC List - Click here and see EdX's Active Discounts, Deals, and Promo Codes.

The course begins with an introduction to amorphous materials. We explore glasses and polymers, learn about the factors that influence their structure, and learn how materials scientists measure and describe the structure of these materials.
Then we begin a discussion of the crystalline state, exploring what it means for a material to be crystalline, how we describe directions in a crystal, and how we can determine the structure of crystal through x-ray diffraction. We explore the underlying crystalline structures that underpin so many of the materials that surround us. Finally, we look at how tensors can be used to represent the properties of three-dimensional materials, and we consider how symmetry places constraints on the properties of materials.
We move on to an exploration of quasi-, plastic, and liquid crystals. Then, we learn about the point defects that are present in all crystals, and we will learn how the presence of these defects lead to diffusion in materials. Next, we will explore dislocations in materials. We will introduce the descriptors that we use to describe dislocations, we will learn about dislocation motion, and will consider how dislocations dramatically affect the strength of materials. Finally, we will explore how defects can be used to strengthen materials, and we will learn about the properties of higher-order defects such as stacking faults and grain boundaries.

What you'll learn

  • How we characterize the structure of glasses and polymers
  • The principles of x-ray diffraction that allow us to probe the structure of crystals
  • How the symmetry of a material influences its materials properties
  • The properties of liquid crystals and how these materials are used in modern display technologies
  • How defects impact numerous properties of materials—from the conductivity of semiconductors to the strength of structural materials

Course Syllabus

Part 1: An Introduction to Materials Science
Structure of materials roadmap
States of matter and bonding
Part 2: Descriptors
Descriptors: concept and function
Free volume
Pair distribution function
Part 3: Glasses
Glass processing methods
Continuous network model
Network modifiers
Part 4: Polymers
Random walk model
Chain-to-chain end distance
Order and disorder in polymers
Part 5: An Introduction to the Crystalline State
Translational symmetry
The crystalline state in 2D
The crystalline state in 3D
Part 6: Real and Reciprocal Space
Miller indices
Real space
Reciprocal space
Part 7: X-Ray Diffraction
Bragg’s Law
Diffraction examples
Part 8: Symmetry in 2D Crystals
Translation, mirror, glide and rotation symmetry
Part 9: Point groups in 2D
Allowed rotational symmetries in crystals
The 10 2D point groups
An introduction to crystallographic notation
Part 10: Plane groups in 2D
The five 2D lattice types
The 17 plane groups in 2D
Part 11: Symmetry in 3D Crystals
Inversion, Roto-Inversion, and Roto-reflection
Screw symmetry
Part 12: 3D Space Point groups
Space point groups
Stereographic projection
Part 13: 3D Space Groups
Crystal lattices
Space groups
Part 14: An Introduction to Tensors
Symmetry constraints on materials properties
Coordinate transformation
Part 15: Quasi, Plastic, and Liquid Crystals
Quasi crystals
An introduction to plastic and liquid crystals
Liquid crystal descriptors
Liquid crystal applications
Part 16: Introduction to Point Defects
Thermodynamics of point defects
Vacancies, interstitials, solid solutions and nonequilibrium defects
Part 17: Ionic Point Defects & Diffusion
Kröger-Vink notation
Extrinsic defects
Diffusion
Part 18: Dislocations and Deformation
Intro d shear stress
Part 19: Strengthening & Surface Energy
Strengthening Mechanisms
Surface free energy
Wulff shape
Part 20: 2-Dimensional Defects
Surface defects
Stacking faults
Grain boundaries
Surface reconstruction
Linear defects in liquid crystals

Go to Class
MOOC List is learner-supported. When you buy through links on our site, we may earn an affiliate commission.

Related Courses

Fundamentals of Non-Destructive Testing (edX) EdX
Purdue University,PurdueX

Fundamentals of Non-Destructive Testing (edX)

Engineering Science

Learn the fundamentals of non-destructive testing (NDT), a technique used to evaluate material and structure properties and defects without causing damage. Non-destructive testing (NDT) is used across industries to ensure product integrity and reliability; it is used in the aerospace, defense, oil and gas, and automotive sectors. In civil engineering, NDT is commonly used to detect flaws and defects in concrete elements and structures.

Jan 10th 2022
5-12 Weeks
Engineering Materials Elasticity
Details
Advanced Engineering Systems in Motion: Dynamics of Three Dimensional (3D) Motion (Coursera) Coursera
Georgia Institute of Technology

Advanced Engineering Systems in Motion: Dynamics of Three Dimensional (3D) Motion (Coursera)

Engineering

This course is an advanced study of bodies in motion as applied to engineering systems and structures. We will study the dynamics of rigid bodies in 3D motion. This will consist of both the kinematics and kinetics of motion. Kinematics deals with the geometrical aspects of motion describing position, velocity, and acceleration, all as a function of time. Kinetics is the study of forces acting on these bodies and how it affects their motion.

Nov 2nd 2026
5-12 Weeks
Engineering Structures Motion
Details
Engineering of Structures: Tension and Compression (Coursera) Coursera
Dartmouth College

Engineering of Structures: Tension and Compression (Coursera)

Engineering

This course deals with tension and compression. After going through this course, you will understand why tensegrity structures and sculptures are different from other structures. You will also explore tension and compression in different types of trusses. Additionally you will understand determinacy and realize how it applies to trusses.

Oct 26th 2026
3 Weeks
Engineering Structures Tension
Details
Diffusion and Mass Transfer (FutureLearn) FutureLearn
Taipei Medical University

Diffusion and Mass Transfer (FutureLearn)

Engineering Science

Master a core field of chemical engineering by learning about transport phenomena like diffusion, convection, and mass transfer. This six-week course from Taipei Medical University (TMU) provides a comprehensive overview of transport phenomena, with a particular focus on diffusion, mass transfer, and convection. Once you’ve understood the fundamentals of all three processes, you’ll learn how to analyse them using coefficient models.

Self Paced
5-12 Weeks
Chemical Engineering Transport Phenomena Mass Transfer
Details
Structures en architecture (FUN) FUN
Ecole Nationale Supérieure d’Architecture de Montpellier

Structures en architecture (FUN)

Engineering

Ce MOOC est une introduction aux notions de base de mécanique des structures en architecture. L’équipe pédagogique a souhaité renouveler l’approche de l’enseignement des structures en tenant compte des profonds changements en matière d’apprentissage des étudiants, mais elle n’en a pas pour autant abandonné les exigences de rigueur indispensables aux notions abordées. Cette approche est sensible et progressive, et partira des propres intuitions de chacun pour aller étape par étape vers la compréhension des phénomènes physiques en jeu.

Nov 14th 2022
5-12 Weeks
Architecture Structures Mécanique des Structures
Details
Elements of Structures (edX) EdX
MIT,MITx

Elements of Structures (edX)

Engineering

An introductory course on statics and on the mechanical behavior of deformable structural elements like beams, shafts and rods. 2.01x introduces principles of structural analysis and strength of materials in applications to three essential types of load-bearing elements: bars in axial loading, axisymmetric shafts in torsion, and symmetric beams in bending.

No sessions available
5-12 Weeks
MATLAB Structures Beams
Details
Mechanics of Deformable Structures: Part 1 (edX) EdX
MIT,MITx

Mechanics of Deformable Structures: Part 1 (edX)

Engineering Statistics & Data Analysis

Study the foundational mechanical engineering subject “Strength of Materials”. Learn to predict deformation and failure in structures composed of elastic, elastic-plastic and viscoelastic elements. Many natural and man-made structures can be modeled as assemblages of interconnected structural elements loaded along their axis (bars), in torsion (shafts) and in bending (beams). In this course you will learn to use equations for static equilibrium, geometric compatibility and constitutive material response to analyze structural assemblages.

No sessions available
5-12 Weeks
Mechanics Structures Mechanical Engineering
Details
Microstructural Evolution of Materials Part 1: Statistical Mechanics (edX) EdX
MIT,MITx

Microstructural Evolution of Materials Part 1: Statistical Mechanics (edX)

Engineering Sci: Chemistry

Discover the principles of statistical mechanics that explain materials science phenomena. This module is Part 1 of a four-part series on the Microstructural Evolution in Materials. Taken together, these four modules provide similar content to the MIT Course 3.022: Microstructural Evolution of Materials. This series introduces various kinetic phenomena in various classes of materials. The course explains how materials develop different microstructure based on different processing techniques, and it relates these microstructures to the properties of the material.

Self Paced
Self-Paced
Materials Statistical Mechanics Entropy
Details
Engineering of Structures: Tension (Coursera) Coursera
Dartmouth College

Engineering of Structures: Tension (Coursera)

Engineering

This course deals with tension. Tension is one of the easiest forces to understand. It is a pulling force. When we tend to pull an object, it is in tension. Different elements that resist tension in buildings are ropes, cables, and funicular forms. You will study different structures and identify what role tension plays in their designs. The first module explores tension and its importance in building structures.

Oct 26th 2026
3 Weeks
Engineering Structures Tension
Details